Tag Archives: Hot Tub Leak Repair

Hot Tub Leak Repair

If your hot tub is having any leaks, then it can be real tough to look out for a place from where it is leaking. However, if you are going to follow some simple procedures, then you may be able to find it and get it repaired. To get hot tub repair in Edmonton you don’t have to search much and can find good professionals who will do the work for you. If you want to look for the source of leak, here are some places that you should look in.

  • Pump end seal.
  • Heater assembly and its manifold.
  • Plumbing parts and the tubing.
  • Jet seals and jet bodies.
  • Gate valves.
  • Connections of the plumbing.
  1. Pump

The first place that you should look out for is the pump. In most of the cases, pumps are the first components that leak. The cause of leaking is often a bad pump seal. If you notice water droplets, then you need to determine whether the seal needs replacement of the entire wet end. If there is puddle of water, then you might need to get the entire wet end replaced. Changing the wet end is a much better option as seals tend to get damaged and they often break during the time of replacement. Changing seals is also a time consuming process. You can contact any Sherwood park hot tub repair for the procedure.

  1. Unions

Union fittings and plumbing also needs to be checked in case of leaking. Check all the joints of the unions around the tub and the heater. Unions should never be tightened using a winch as they can be tightened by hands. Using a winch will put too much pressure causing them to break. The hot tubs Edmonton cost includes all the plumbing maintenance charges in the initial package and in case of any leakage, you can contact the professionals.

  1. Heater

Heater assembly includes the pressure switch and other heating components. If you find any leaking in the heater, then you need to call in the professional to change the part that is the cause of the leakage. You also need to take care of the rubber seals around the heater as over the period of time; they tend to become hard and brittle, causing the heater to leak.

  1. Jets and other connections

Due to prolonged usage, the jets and the other connection components may develop a slight leakage. If the leak is minor then you can seal it off using a sealant. Fix-a-leak is the most preferred sealant that is used to seal off the leaks around tubs. It can fix leaks of various diameter jets and you can cover the area of the leak and seal them. If you still find a leaking jet, then you may have to change the housing which can be done by any professional tub repair in Edmonton